SCZ-4018M-16POE-V1
16 Ports 10/100M PoE Switch with 2 10/100/1000 Fiber ports, Built in 250W Power budget
- Fully IEEE802.3af/at standard compliant
- Support PoE power up to 15.4W/30W for each PoE ports
- Auto detect powered device(PD)
- Safe and reliable power to most of PoE end device
- 10/100Mbps Supported
| Mobel Details | |
| Mobel | SCZ-4018M-16POE-V1 |
| Network Standards | IEEE802.3i 10BASE-T |
| IEEE802.3u 100BASE-TX | |
| IEEE802.3u 100BASE-TX | |
| IEEE802.3af/at Power over Ethernet | |
| PoE Power | 15.4 per port(IEEE802.3af) /30W per port (IEEE802.3at) |
| Wiring:Data provided over pairs over1/2 and3/6 | |
| Cable:Unshielded UPT cat.5 or higher | |
| Processing Types | Store-and-Forward |
| Half-Duplex back pressure and IEEE802. 3x full-duplex | |
| Flow Control | |
| Address Database Table Size | 4KMAC Address |
| Buffer memory | 1.24MB embedded memory per unit |
| Network Latency | Less than 20us for 64-byte frames in Store-and-forward |
| mode for 100Mbps to 100Mbps transmission | |
| Administrative Switch Management | -IEEE802.1 Q static VLAN (128 groups,static) |
| -IEEE802.1p Class of service (CoS) | |
| -Port based QoS | |
| -DSCP-based QoS | |
| -IEEE802.3 and link aggregation (Manual or LACP) | |
| -IEEE802.1 D Spanning Tree Protocol | |
| -SNMP v1, V2c, v3 | |
| -RFC 1213 MIB II | |
| -RFC 1643 Ethernet interface MIB | |
| -RFC 1493 bridge MIB | |
| -RMON Group 1,2,3,9 | |
| -RFC 2131 DHCP client | |
| -IEE802.1x | |
| -Port-Based security by locked MAC addresses | |
| -MAC ACL | |
| -Storm control for broadcast, multicast and unicast packets | |
| Network Ports | 16 10/100 Mbps auto-sensing Fast PoE Ethernet Ports |
| 4 10/100/1000 Mbps auto-sensing Gigabit uplink Ports | |
| Ethernet Switching Ports (RJ-45) | |
| -2 Dual Personality SFP ports |
Coming Soon
